Square Adjustable Non-IC/StopAire™ Housing

R4ASQNC

Specification Grade Square 16 Gauge Galvanized Steel New Construction Housing with Die-Cast Aluminum Heat Sink
Requires minimum 3-inch clearance around Housing from insulation material; thermal protection provided in case of improper insulation use
Can be used in sloped ceiling applications
Fully lockable adjustment mechanism allows 45° of tilt with white graduation marks every 15° for consistent aiming, plus 360° for rotational adjustment.
Housing aperture can be adjusted 1/4- inch in each direction, as well as 11° of angular adjustment (5.5° per side) post installation to ease fixture alignment
2700K, 3000K, 3500K and 4000K Color Temperatures; 80 CRI min., 83 typical; high CRI of 90+ available
Precision Optics produce 19° Spot, 35° Medium and 51° Flood beam distributions; optics are interchangeable and can be field replaced
FA-57 Black Accessory Holder Clip can support two (2) media
All R4A Downlights are available for non-dimming and dimming applications; for compatible Dimmers, refer to the Dimming Specification Sheet
Specification Grade Trims in several different styles and finishes available; NOTE: R4ASQ Series and R4SQ Series Trims are NOT compatible with each other
cCSAus Certified using US (UL) and Canadian (CSA) standards; Suitable for Damp Locations
Conforms to Washington State Energy Code (WSEC) for Low Air Infiltration; tested in accordance with ASTM E283 (2.0 CFM or less)
Chicago Plenum Housings are CCEA listed
Assembled in the USA

Updated

Updated